Frequently asked questions
The costs associated with purchasing a new boiler and arranging its installation can vary significantly, as one would anticipate. Here are several factors that impact the price of acquiring a new boiler:
Type of boiler: If you opt for a heat-only or storage boiler, you may need to invest in a hot water cylinder.
Brand and model: Like any other purchase, you get what you pay for. Choosing the cheapest option might be a false economy. A high-quality boiler has a longer lifespan, saving you money and avoiding breakdown issues in the long run.
Size: If you are acquiring a larger boiler for a more substantial residence, it is reasonable to expect a higher cost.
Our team of experienced heating engineers exclusively installs models that have been tried, tested, and proven reliable. They provide candid advice on the merits of each brand. If you are uncertain about the make and model, please call us; we will gladly assist.
Several factors influence the cost of installing your boiler:
New pipework required and/or a change of location: If you inherited a boiler in an inconvenient location, now is the opportunity to relocate it to a more suitable place, albeit at an additional cost.
Cleaning your heating system: Clear pipes and radiators are essential during a new boiler installation, and various methods exist to achieve this. For example, a power flush can cost around £400.
New radiator valves: Fitting thermostatic radiator valves are relatively inexpensive and can effectively maintain system balance and comfortable room temperatures.
More significant gas supply line: A more significant supply line between your boiler and gas meter may be necessary for bigger boilers to prevent excessive pressure drops.
Replacing one type of boiler with another: Switching from a heat-only system to a combi boiler, for instance, requires more labour and re-piping.
If you have concerns about the additional costs associated with boiler fitting, please call us. We will assist you in making informed decisions and, hopefully, provide peace of mind.
The average life expectancy for a boiler is between 10 and 15 years. Ensure your boiler is maintained correctly with a regular, annual service. This will keep your system functioning for as long as possible.
And we've already mentioned it, but you get what you pay for with boilers. If you can afford the up-front cost, a higher-quality system makes sense and will likely save you money in the long run.
Every year, there are around 60 deaths from carbon monoxide poisoning in homes in England and Wales. Don't risk it.
If you have a gas-fired boiler, fit a smoke alarm and a carbon monoxide detector for your and your family's safety and, if you're a landlord, anyone living in your property. Faulty gas appliances can produce carbon monoxide, which has no colour, smell or taste. The gas is difficult to detect, but its effects can be fatal.
You can install three main types of boilers: combi boilers, heat only (regular boilers) and system boilers.
The one most suitable for you and your home largely depends on your current hot water demands, but it's also important to consider other factors, such as the age of your current heating systems and the pressure of your mains water supply.
Yes, all our heating engineers are qualified and Gas Safe registered.
Most modern boilers should have an energy efficiency sticker on the boiler or in the pack that you will have been given. The rating will be clearly displayed here.
If you have an older system, check under the boiler where the pipes come out and under the flap at the front where the dials are. You should find a small sticker or plate with the exact model here.
Once you have the model, the best place to check the rating is to go to the Product Characteristics Database (PCDB). This comprehensive website has nearly every boiler ever made, and it's usually easy to find your boiler efficiency figure here. Look for the seasonal efficiency figure, which gives you the best idea of how your system performs throughout the year.
Our Gas Safe-registered engineers conduct thorough checks, covering:
- The flue, both internally and externally
- Boiler and pilot light or auto-ignition
- Operating pressure and/or heat input
- Safety devices
- Case seals
- Internal components, including burner, heat exchanger, main injector, and spark probe
We will safely ignite your boiler to identify any operational faults, clean necessary parts, and generate a service report detailing the engineer's actions.
An annual boiler service with one of our Gas Safe-registered engineers is advisable if you want your boiler to maintain safe and efficient operation.
According to a 2021 Which? Survey, only three out of 10 boilers serviced annually require repairs within their first six years. This figure doubles to around six out of 10 boilers when serviced every two to five years. Investing a bit in your boiler's care now can prevent significant issues down the line.
At Ballinger Heating and Plumbing, we offer one-off services and boiler cover packages with an annual service included.
Each option has its pros and cons. Opting for a one-off service may save you money if you have a new and reliable boiler. However, it could be a false economy for an old and failing boiler. If you're thinking long-term, our boiler cover package provides peace of mind and could extend your boiler's lifespan.
This is an age-old issue! If you own an older gas boiler, chances are you've encountered the pilot light frequently going out. Fortunately, you can easily reset it by following these simple steps – please exercise caution:
- Turn on the thermostat.
- Locate the labelled pilot valve and switch it to the 'off' position.
- Keep the boiler open for about five minutes to allow potentially hazardous flammable gases to disperse.
- Find the pilot light, typically near the pilot valve.
- Turn the valve back to 'pilot' and ensure gas flows out.
- Place a long match or lighter at the pilot's tip.
- Once lit for approximately a minute, switch the valve to the 'on' position.
- Adjust the thermostat back to your desired setting.
If the pilot light continues to extinguish, you may need to clean out the pilot tube, or it could be as simple as a breeze or draft.
If you're unsure or facing persistent issues with your pilot light, one of our Gas Safe-certified engineers will assist you in identifying and rectifying the problem.
Cold radiators pose a common issue with various potential causes, including:
- The thermostat is set too low
- Malfunctioning timer
- Closed radiator valve
- Air pockets in the system
- Blockages within the system
- Circulation fault
If all your radiators are experiencing problems, it is likely related to your central heating or boiler. However, if only one or two radiators are causing issues, there are specific solutions:
One radiator stays cold – Ensure the valves on each side of the radiator are open. They may be blocked if they are open, but the radiator remains cold. Cleaning the system by one of our Gas Safe-registered engineers should resolve this.
Cold radiators upstairs – There is a possibility that the feed from your expansion tank has run dry. In this case, our engineers would clear any obstructions to the ball valve in your cistern and then refill the tank to ensure enough water to float the ballcock.
Cold radiators downstairs - could indicate a problem with the pump responsible for circulating water in your heating system. A hot or noisy pump might be on the verge of breaking down. If this is the issue, one of our Gas Safe-registered engineers can either repair or replace the pump for you.
Air trapped in your radiator means you all need to bleed it. You will know if this is the case if your radiator is cold at the top, the entire radiator is cold, or it is making a rattling sound.
Here are some straightforward steps for bleeding your radiator:
- Turn on your heating and wait for all your radiators to heat up.
- Examine each radiator to ensure an even temperature across its surface (exercise caution when touching). A radiator that feels cold or emits noise likely requires bleeding.
- Turn off your heating and allow the radiators to cool down.
- Position an old towel or another absorbent material (not your partner's favourite onesie) beneath the radiator bleed valve to catch any water.
- Open the valve, typically located at the bottom of your radiator, to release the air. Close the inlet and outlet at each end, then remove the screw from the valve's centre. Insert the radiator key into the bleed valve and slowly turn it anti-clockwise. You should hear a hissing sound as the air escapes.
- When the hissing stops and water starts to leak out, turn the key clockwise to close the valve.
Check the boiler pressure for each radiator that requires bleeding. If the boiler pressure is too low, you must repressurise the system. If the pressure is normal, you can switch on your heating and verify that your radiators are heating up.
Never bleed a radiator when the heating is turned on because it may be too hot to touch, and hot water could spray. Also, if you bleed a radiator when the pump runs, you will only draw more air into the system from elsewhere.
You can typically find a water pressure gauge at the front of your boiler. Older boilers often feature a hydraulic pressure gauge, which includes red sections on the dial indicating low and high pressure. In more contemporary systems, a digital gauge will flash to indicate low or high-pressure warnings.
A low reading on the pressure gauge may suggest a water loss from the system. A high reading might indicate the need to bleed a radiator. We recommend calling us if you encounter high pressure with your boiler. This situation can be potentially hazardous and requires the expertise of a Gas Safe-registered engineer to address it.
You might have a leak within your boiler system. Even if it's minor, it could result in a gradual decrease in pressure over time. Check for indications of damp patches around pipes, radiators, and the boiler. However, it's crucial never to inspect for leaks inside your boiler. Only a Gas-safe engineer should open your system.
Contact one of our engineers if you discover a leak or need to regularly top up the water pressure. They'll arrange a visit to diagnose and address the issue.
Replacing a boiler is sometimes more economical than continuously investing in regular repairs. Indications that a replacement may be necessary include:
- Radiators take longer to heat up
- The boiler emitting a foul smell
- Unusual noises coming from your boiler
- Frequent leaks in your system
- An increase in your gas bills
Boilers and central heating systems are intricate, and a Gas Safe-certified engineer may address these issues through a simple repair. However, like any machinery, boilers undergo wear and tear and eventually require replacement.
Arrange a call-out with one of our experienced, qualified engineers to receive an honest, expert assessment of your best course of action. We'll provide you with multiple options and our top recommendation.
What our customers say
“Pete was brilliant; he went above and beyond to replace our boiler when the old one broke down and needed replacing. Very happy with all aspects of his work and would strongly recommend him to anyone!”
Peter was punctual and carried out a full day’s work. He was courteous to my neighbours and considerate when parking his van. He obviously has a lot of experience and even solved a few headaches for me. He had all the necessary equipment and left everything in a tidy and functional state.”
Lovely new boiler fitted .. very neatly done as the old boiler was a right mess.. he’s a lovely chap and very interesting to talk too.. glad he came as quick as he did and his work is excellent. He even hovered up all the mess and made me a cup of tea !!
Great work and at competitive price, would highly recommend. Left house clean each day and completed all on time.
Call for a free estimate
In the Stroud area? Call now to book a free consultation